3
CELL CULTURE GLUCOSE TEST
STRIP
1: Aperture: apply the sample to either side of strip.
2: Test Confirmation Window: make sure the chamber
is filled up with test sample to ensure the correct result.
For example:
3. Gray Electrode End: insert this end of test strip into
meter.
IMPORTANT TEST STRIP INFORMATION
GlucCell
TM
System measures the amount of glucose in
cell culture medium. Sample can be applied both to the
right or left side of the test strip’s apertures and is
automatically drawn to the test confirmation window
where the reaction takes place.
GlucCell
TM
Glucose Test Strips are intended for
in vitro
analysis use with cell culture medium. Results will not be
accurate if used with samples containing no electrolyte.
Do not use test strips beyond the expiration date indicated
on the strip vial label.
The discard date for test strips is 90 days after first
opening the vial. Record the discard date on the vial,
when you open a new vial of test strips.
GlucCell
TM
Glucose Test Strip could be damaged by heat
and light. Keep them sealed in the original vial.
Store the vial in a cool, dry place below to 40
0
C/104
0
F and
above 10
0
C/50
0
F. Do not refrigerate.
Do not use damaged test strips or abnormal test strips.
Use the test strip immediately once after removing it from
the vial; replace the vial cap and close it tightly.
Do not transfer test strips to a new vial. Always carry test
strips in their original vial.
Do not place test strips in direct heat or sunlight.
Do not carry loose test strips in your carrying case.
Test strips are for single use only.
