5
SETTING METER PARAMETERS
SETTING TIME & DATE
When you first time install the battery into the meter or
every time when replace a battery, the meter will
automatically enter to the setting mode. Please set
correct time and date before you begin testing.
How to set time and date
Press S BUTTON for 3 seconds to turn on the meter. The
meter will enter to the setting mode automatically.
At the beep sound, the year will flash - for example for the
year of 2009, number
” 09 “will appear.
Press S or M button to obtain the desired year.
Wait the new setting flash 3 times to confirm and shifts to
the next setting.
Repeat to set the month, day, hour and minute. After
minute is set, the meter will display
“OK” before turn off.
NOTE: WHILE SETTING THE TIME AND DATE, YOU
CAN EXIT THE SETTING MODE ANYTIME BY PRESS
M BUTTON FOR 3 SECONDS.
