-14-
Using the Spot Cleaner
3. Detach the power cord plug from the power cord.
4. Plug the power cord plug into an outlet located near the floor.
IMPORTANT!
Before using the spot cleaner, thoroughly vacuum the area to be
cleaned. Always test a small hidden area for colorfastness and pile distortion.
Test Colorfastness - Gently rub surface with a dampened white cloth containing
cleaning solution. Wait 10 minutes and check for color removal with a white paper
towel. If color changes, do not use.
NOTE:
To prevent staining, please use plastic, wax paper or aluminum foil to
protect wood or metal surfaces from possible water spray.
To protect the wooden floors underneath rugs, place protective material (e.g.
plastic) underneath them before cleaning.
NOTE:
Always refer to and follow the manufactures care guidelines before using
spot cleaning solution and spot cleaner.
1. Unwrap the hose from the unit. Make sure the tough stain nozzle is attached
securely.
NOTE:
The tough stain nozzle can be used for cleaning carpet stains, furniture
and other hard-to-reach surfaces.
2. Turn the power cord hooks inward from either side to release the power cord.
