Vacmaster VJF910PF 0201, Operator'S Manual

10

WARNING:

 DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE 

SURE THE PLUG IS DISCONNECTED BEFORE CHANGING THE FILTERS. 

CAUTION:

 DO NOT VACUUM DRYWALL DUST, FIREPLACE SOOT, OR ASH 

WITH STANDARD WET/DRY FILTER. THIS IS A VERY FINE DUST WHICH WILL NOT 

BE CAPTURED BY THE FILTER AND MAY CAUSE DAMAGE TO MOTOR. WHEN 

VACUUMING FINE DUST USE A FINE DUST FILTER (INCLUDED). TO PURCHASE 

ADDITIONAL FINE DUST FILTERS, CALL 1-866-384-8432 OR GET THEM AT YOUR 

LOCAL OR ONLINE VACMASTER

®

 RETAILER.

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

2. In order to prepare your vacuum for dry vacuuming, make sure the cartridge filter completely 

covers the filter cage against the power head. Your wet/dry vacuum comes with the cartridge 

filter pre-installed. For installation instructions, see page 14 (Fig. 2 & 3).

3. Place the filter retainer on the top of the cartridge filter and tighten down by turning the retainer 

handle clockwise (Fig. 4).

4. Place the power head back on the collection tank and secure it in place using the latches (Fig. 5).

OPERATING INSTRUCTIONS: DRY VACUUMING

5. Insert the larger end of the hose into the vacuum port on the power head and lock into place.

6. Choose the desired accessory and insert onto the end of the hose (Fig.6).

7. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the power 

outlet. Plug the power cord into the outlet (Fig. 7 & 8).

8. Turn the motor on by flipping the switch to the ‘I’ ON position and begin vacuuming (Fig. 9).

9. Once you have completed vacuuming, flip the switch to the ‘O’ OFF position and unplug the 

power cord from the outlet.

      O = OFF      I = ON

DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.