background image

16

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

The wet/dry vacuum will not 

operate.

No power supply.

Check the power supply, cord, 

breakers, and fuses.

Faulty power cord.

Unplug and check the power 

cord.  If damaged, have it 

repaired by a professional.

Collection tank is full.

Empty the collection tank.

Switch in the wrong position.

Press the ON ‘I’ button on the 

power head.

The dust comes out from 

the motor cover.

The cartridge filter is missing or 

damaged.

Attach or replace the cartridge 

filter.

Vacuum has been used to collect 

fine dust, such as dry wall dust, 

fireplace soot, or ash, without a fine 

dust filter.

Remove the standard cartridge 

filter and buy the appropriate 

fine dust filter.

Reduced efficiency and 

motor/speed vibration.

There are blockages in the nozzle, 

hose, or the collection tank inlets.

Unplug and check nozzle, hose 

and collection tank inlets for 

blockages.

The cartridge filter is clogged by 

fine dust.

Take off the filter and clean it or 

install a new cartridge filter.

WARNING:

  TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE 

TROUBLESHOOTING.

Summary of Contents for VJF910PF 0201



















Reviews: