Please read all instructions before operating the
VP
120
.
USING THE
VP
120
VACUUM PACKAGING MACHINE
1. Plug the machine into a grounded electrical outlet
Properly insert the machine’s electrical plug into a grounded wall outlet. The machine lid will
raise automatically and the LeD screen on the control panel will read “OFF”.
2. Press the ON/OFF button
The LeD screen on the control panel will read “ON”.
3. Adjust/set timing controls
4. Select a vacuum chamber pouch
Select the proper size of vacuum chamber pouch for the product that you are packaging.
Make sure that the mouth of the pouch does not exceed the length of the seal bar, and
of the pouch to ensure a quality, air-tight seal. The VP120 accepts vacuum chamber pouches
up to 10”W x 13”L in size.
7
Operating Instructions
Vacuum Time:
The default seal time is 5, which is appropriate for standard applications.
You can adjust the time from 5-9. Each number equals ½ of a second. If you wish to
change the seal time, press the SET button twice or until the Seal Time indicator light is
illuminated. Use the + / - buttons to adjust the seal time to accommodate your application.
It is recommended that you make adjustments in 1 increments to avoid melting the pouch.
The seal time can vary from 3-9. Increments. Delete the word seconds that are highlighted
in red and yellow.
Note: If the machine is unplugged, the vacuum time and seal time will reset to the
default settings.