Vacmaster VP680, User Manual

10

ARY, Inc.  |  11880 College Blvd Suite 550 Overland Park, KS 66210 |  www.VacMasterFresh.com  |  800-821-7849

VP

680 Chamber Vacuum Sealer

 | 

User Guide

To prolong the life of your seal bar, set the 

cooling time to twice the sealing time.

TIP:

NOTE:

After setting the timing controls, press the SET button until the function 

lights on the control panel are no longer illuminated.  The machine will not start 
until all function lights are off.

1.  Select a vacuum chamber pouch

Select the proper size of vacuum chamber pouch for the product that you 

are packaging. Make sure that the mouth of the pouch does not exceed 

the length of the seal bar and make sure the entire pouch fits inside the 

chamber. Allow 3” of extra headspace at the top of the pouch to ensure a 

quality, air-tight seal. The VP680 accepts vacuum chamber pouches up 

to 18"W x 28"L (front bar) and 20”W x 28”L (side bar) in size.

Set Up - Adjusting the VP680 Timing Controls

Vacuum Time:

 To increase or decrease the vacuum time, press the SET 

button until VACUUM is illuminated and then use the UP/DOWN buttons to 

adjust the vacuum time accordingly. The time setting will display on the LED 

Screen on the control panel.  

NOTE:

Filler plates can be used to reduce the vacuum time required.  Place the 

filler plates inside the chamber as desired.  Filler plates occupy space, leaving 
less air to be removed from the chamber.  If you require more space inside the 
chamber, remove the filler plates to accommodate your product.

Sealing Time: 

To increase or decrease the sealing time, press the SET button 

until SEALING is illuminated and then use the UP/DOWN  buttons to adjust 

the sealing time to accommodate your application.  It is recommended 

that you make adjustments in 0.2 second increments to avoid melting the 

pouch.  

NOTE:

Cooling Time: 

To increase or decrease the cooling time, press the SET 

button until COOLING is illuminated and then use the UP/DOWN buttons to 

adjust the cooling time accordingly.  

NOTE:

The VP680 settings will always default to the most recently used settings 

on the machine

How to Use