8
Note on replacing filtering floater
If the amount of mist released by the humidifier decreases, or the humidifier emits
abnormal noises, this may indicate malfunction of the filtering floater. Check the
filtering floater, and if found necessary.
Before replacing the filtering floater, make sure the humidifier is turned off and
unplugged from the power outlet.
1.
Remove the lid from the humidifier.
2.
Remove the filtering floater tube from the lid by turning the tube clockwise.
3.
Slide the filtering floater out of the tube. Then slide a new filtering floater into the
tube, while ensuring that the end of the floater with “UP” labeled faces towards the lid.
4.
Re-attach the filtering floater tube to the lid: align the tabs on the tube with the slots
on the lid then turn the tube counter clockwise for a secure fix.
