1
vacon • 12
Safety
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
1.10
Declaration of conformity
Figure 6. Declaration of conformity.
Date
Issued by
Date
Approved by
15-04-2016 Signature
Name:
Antti Vuola
Title:
Head of Standard Drives
15-04-2016 Signature
Name:
Timo Kasi
Title:
VP, Design Center Finland and Italy
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any
other language, the translator concerned shall be liable for the correctness of the translation
ID No: DPD01852
Revision No: A
Page
1 of 1
Danfoss A/S
DK-6430 Nordborg
Denmark
CVR nr.: 20 16 57 15
Telephone: +45 7488 2222
Fax: +45 7449 0949
EU DECLARATION OF CONFORMITY
Danfoss A/S
Vacon Ltd
declares under our sole responsibility that the
Product(s)
Vacon 100 X AC drive
Type(s)
Vacon 0100 3L 0007 2…0062 2 X
Vacon 0100 3L 0003 4…0072 4 X
Vacon 0100 3L 0003 5…0072 5 X
Product Safety Functions:
Safe Torque Off (EN 61800-5-2:2007) and Emergency stop (EN-60204-1:2006+A1:2009+
AC:2010 in extracts)
Covered by this declaration is in conformity with the following directive(s), standard(s) or other
normative document(s), provided that the product is used in accordance with our instructions.
EN 61800-5-2:2007
EN 61800-5-1:2007 (LV Directive compliance)
EN 61800-3:2004+A1:2012 (EMC Directive compliance)
EN ISO 13849-1:2008+AC:2009
EN 62061:2005+AC:2010
and conforms to the relevant safety provisions of Low Voltage Directive 2006/95/EC (until April 19th, 2016),
2014/35/EU (from April 20th, 2016) and EMC Directive 2004/108/EC (until April 19th, 2016), 2014/30/EU
(from April 20th, 2016), and EC Machinery Directive 2006/42/EC.
Notified body that carried out the EC type examination:
TÜV Rheinland Industrie Service GmbH,
Alboinstr. 56, 12103 Berlin / Germany
Certification Body for Machinery NB 0035, Certificate No. 01/205/5219.01/13 (applied to 480V,
500V)
The year the CE marking was affixed:
2012
