252
• VACON®
apfiff09 marine
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
P2.13.3 to
P2.13.10 Fieldbus data OUT selections 1 to 8 ID852-
ID859 “FB Data OutX Sel”
With these parameters, you can monitor any monitoring or parameter value from the
fieldbus. Enter the ID number of the item you wish to monitor for the value of these
parameters. See monitoring signals for full details of ID numbers.
Default settings:
Data
Value
Unit
Scale
ID
Status Word
Main Status Word
FB General Status
Word
MCStatus
64
FB Actual Speed
Actual Speed
%
0.01 %
Process data OUT 1
Output Frequency
Hz
0.01 Hz
1
Process data OUT 2
Motor Speed
rpm
1 rpm
2
Process data OUT 3
Motor Current
A
0.1 A
45
Process data OUT 4
Motor Torque
%
0.1 %
4
Process data OUT 5
Motor Power
%
0.1 %
5
Process data OUT 6
Motor Voltage
V
0.1 V
6
Process data OUT 7
DC link voltage
V
1 V
7
Process data OUT 8
Active Fault Code
-
-
37
P2.13.11 to
P2.13.18 Fieldbus data OUT selections 9 to 16 ID558-565
“FB Data
OutX
Sel”
With these parameters, you can monitor any monitoring or parameter value from the
fieldbus. Enter the ID number of the item you wish to monitor for the value of these
parameters. See monitoring signals for full details of ID numbers.
Note that these parameters are visible only if a Fieldbus board with support for 16
process data variables is inserted in slots D or E. By default, these parameters are not
used.
P2.13.19 to
P2.13.26 Fieldbus data IN selections 1 to 8
ID876-833
“FB Data In X Sel”
With these parameters, you can control any monitoring or parameter value from the
fieldbus. Enter the ID number of the item you wish to control for the value of these
parameters. Monitoring signals that can be controlled from fieldbus are shadowed.
Default settings:
Data
Value
Unit
Scale
ID
Reference
Speed Reference
%
0.01%
-
Control Word
Main Control Word
-
-
-
Control Word 2
General Control Word
Process Data IN1 Torque Reference
%
0.1%
1140
Process Data IN2 Free Analogue INPUT
%
0.01%
46
Process Data IN3 Adjust Input
%
0.01%
47
Process Data IN4 FB Analogue Output
%
0.01%
48
PD4
–
PD8
Not Used
-
-
-
Summary of Contents for apfiff09 marine
Page 1: ...vacon nx ac drives apfiff09 marine application manual ...
Page 2: ......
Page 310: ......
