Page 8 (15)
Vacon
I/O-expander board installation (Vacon CXS-range)
Vacon Plc
Tel:
+358-201 2121
Fax:
+358-201 212 205
Service:
+358-40-8371 150
E-mail:
vacon@vacon.com
http://www.vacon.com
Check the connections and make sure that there are no foreign objects inside the frequency
converter.
Close the cover of the frequency converter.
9
10
Install the jumper removed from the control board X4 terminal into the I/O-expander board
terminal X9. Note: the jumper can be connected in ON or OFF position,see Vacon CX/CXL/
CXS User's manual, Chapter 6.2.2.
13
If you have the option box with the I/O-expander (11) and I/
O-interface boards (12) pre-installed, jump to section 17.
Mount the I/O-expanderboard
(11)
and I/O-interface board
(12)
in the option box
(10)
with the screws.
11
Connect data cable
(13)
between terminal X14 in
the I/O-interface board
(12)
and terminal X14 in
the I/O-expander board
(11)
).
X14
X14
12
Connect power cable
(14)
between terminal X6
in the I/O-interface board
(12)
and terminal
X6 in the I/O-expander board
(11)
.
X6
X6
Table 3-2.
I/O-expander board installation (continues ...).
X9
