CONTROL KEYPAD
vacon • 91
Applications (S6.8.4)
At location S6.8.4 you can find the
Applications submenu
containing information about not only the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
Page
Content
6.8.4.#
Name of application
6.8.4.#.1
Application ID
6.8.4.#.2
Version
6.8.4.#.3
Firmware interface
Table 9-9. Applications information pages
Figure 9-25. Applications info page
In the
Applications
information page, push the
to enter the Application pages of
which there are as many as there are applications loaded into the frequency converter. Locate the
application you want information about with the
and then enter the
Information
pages
with the
Menu button right
. Use again the
Browser buttons
to see the different pages.
Hardware (S6.8.5)
The
Hardware
information page provides information on the following hardware-related topics:
Page
Content
6.8.5.1
Nominal power of the unit
6.8.5.2
Nominal voltage of the unit
6.8.5.3
Brake chopper
6.8.5.4
Brake resistor
Table 9-10. Hardware information pages
Expander boards (S6.8.6)
In the
Expander boards
pages you find information about the basic and option boards connected to
the control board (see Chapter 8.2).
You can check the status of each board slot by entering the
Expander boards
page with the
to choose the board whose status you wish to check.
Push the
again to display the status of the board. The keypad will also display the
program version of the respective board when you push either one of the
If no board is connected to the slot the text
'no board'
will be shown. If a board is connected to a slot
but the connection is somehow lost the text
'no conn.'
is displayed. See Chapter 8.2 and Figure 8-1
and 6-16 for more information.
A1
A7
I/Oterm
I/Oterm
D1
D3
I/Oterm
READY
READY
D1
D3
I/Oterm
READY
NXFIFF01
2.01
I/Oterm
Applications
Basic
Standard
Application id
Version
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
