Cloud Wearable Mobile Video Recorder
Operation Manual
16
the device will reboot and record video as normal.
WIFI(
Blue
)
:
(a)
Blue light off: system does not detect, does not install USB WIFI
Dongle, or the WiFi Dongle was damaged.
(b)
Blue light flashing: System detected USB WIFI Dongle and waiting for
connect with WiFi Dongle.
(c)
Blue light on: success connect with WiFi
1-2 Touch button
Force recording: Device will trigger the forced recording by press
once and then quickly release the force recording button, the red
light blink rapidly, and light will back to normal flash frequency after
the forced recording ends.
Light signal display (On/Off): press this button for 5 second, all light
signal will turn off, and then press 5 second all the light signal on.
Reset device: press this button for 15 second; LED will turn off after 3
second. The device will be reset and record video as manufacture
default setting.
2. Shut off/Stop recording
Device stop recording after remove mobile power connector, at this
point,system will write the buffer back to SD card. In addition, after all light turn
off, user can remove SD card and get all video files from it.
Summary of Contents for VVG-MDE55
Page 44: ......