background image

6

General Information

Do not store objects on top of the power unit.  This will block the motor cooling 

ventilation.  Restricting the cooling airflow may shorten the motor life.

The central vacuum is designed to vacuum ordinary household dirt and dust. The system is 

designed for dry pickup.  A WetVac accessory is needed if the system will be used for liquid 

pickup.
The central vacuum system is a network of inlet valves, 2” PVC tubing, and low voltage wiring 

installed in the walls of your home. To operate the system, simply plug the hose into an inlet 

valve, attach the cleaning tool to the curved hose end and begin vacuuming.  The dirt is 

transported through the in-wall tube system back to the dirt canister (located on the power unit).

Caution:  Do not allow the motor to remain turned on, unless a hose is connected or an 

inlet valve is open.  If air is not permitted to pass through the fan blades, damage may 

occur to the motor.

Registration

To register your VACUFLO

®

 system warranty in the United States and Canada, register online at  

www.cvacregistration.com or fill in and mail the warranty card located with this manual.
Proof of purchase or registration of the VACUFLO System is required before any warranty work 

will be performed by an Authorized VACUFLO Dealer.  Registration ensures a fast and easy 

resolution to your warranty requirements.

Operating Instructions

Using the central vacuum system is easy.  Simply raise the inlet valve lid, insert the hose end 

and attach the desired cleaning tool to the hose wand.  The power unit is activated when the 

hose is inserted into the valve.   

General Power Unit Maintenance

The simple care and maintenance instructions included here will help ensure trouble-free use of 

the central vacuum system.
•  Do not place objects on top of the power unit. The motor could overheat.
•  Do not allow the motor to remain “on” unless a hose is connected or an inlet valve is open.  If 

airflow is not permitted to flow through fan blades, motor damage may occur.

•  Do not operate without the filter in place (models FC300, FC550,650, FC1550). Change the 

filter cartridge (part number 8106-01 or 8107-01) once a year.

•  Do not operate without a disposable bag (part number 9520) in place (models Maxum 5, 

Maxum 7, Maxum 9).

•  Empty the dirt canister when it is 2/3 full.
•  The power unit does not require any lubrication.
•  The exterior of the power unit can be wiped with a clean, dry cloth.  Do not use liquid cleaners 

or water as an electrical shock may occur.

•  For additional service contact the qualified servicing dealer written on the front of this manual 

or locate an authorized dealer online at www.vacuflo.com.

 

VACUFLO

® 

Central Vacuums

Summary of Contents for MAXUM 9

















Reviews: