background image

CONSTRUCTION

Pump Body

X5 CrNi 1810 (AISI 304) stainless steel

Suction Grid

X16 CrNi 16 (AISI 431) stainless steel

Base

Noryl

Impeller

Acetal resin

Diffuser

Polycarbonate with ceramic insert in the 

point of wear

Diffuser cap

Polycarbonate with stainless steel inserts 

in the point of wear

Motor Shaft

Hexagonal, in X10 CrNiS 1809 (AISI 303) 

stainless steel with ceramic insert at the 

point of wear. AISI 416 for the out of water 

parts.

Mechanical Seal

Graphite

Counterface

Aluminium oxide

Power Cable

20m H07 RN-F

Non-Return Valve

Integrated - Plastic

Discharge Head

Noryl with 1 1/4” threaded insert

Note - Thrust bearing ring inserted in every stage

PRODUCT OVERVIEW

The VADA V75-S submersible pumps are suitable for installation in 

traditional wells, water deposits, collection tanks, clear watercourses, 

lakes etc. The V75-S provides a hydraulic system resistant to sand 

corrosive action.

USAGE LIMITATIONS

• 

Type of liquid: clean water with no suspended solids or 

abrasive material

• 

Maximum liquid temperature: 40

O

C

• 

Maximum submersion depth: 20m

• 

Minimum diameter of tank/well: 100mm (without float)

MOTOR

• 

Dry motor with stainless steel casing cooled by pumped 

liquid

• 

Level of protection IP 68

• 

Class F insulation

• 

Single phase power supply with capacitor permanently 

activated

• 

Thermal protection built into the motor winding

• 

Completely insulated cable connection chamber

• 

Self-lubricating ball bearings

• 

Speed of rotation 2850 rpm

• 

Suitable for continuous use

VADA - V75-S

WARRANTY

You have purchased a quality product from Reece Australia. This 

product is covered by a 24 month warranty. This warranty covers faults 

in the product construction, material and assembly. Faulty products 

will be repaired or exchanged free of charge. Faulty items become our 

property.

This warranty does not include faults caused by

• 

Unsuitable or improper use

• 

Incorrect installation

• 

Normal wear and tear

• 

Inadequate or complete lack of maintenance

• 

Chemical, electrochemical or electrical influences

To the maximum extent permitted by law, Reece excludes all warranties 

other than those set out above. In the event of a warranty claim, we 

will replace or repair defective products, or pay for the cost of having 

defective products repaired or replaced, but will not be liable for any 

injury to any person, damage to any property, any indirect or 

consequential loss, or in any other respect.

Summary of Contents for V75-S









Reviews: