How to Chose Size
Measure the depth of the drawer ( for example, if the depth is 13in/330mm,
choose 12in/300mm drawer slides. Deviations of 0.7in/20mm-1in/30mm are suitable)
Original Length
9.9’’/250mm
11.9”/300mm
13.7”/350mm
15.7”/400mm
17.7”/450mm
19.7”/500mm
21.7”/550mm
23.7”/600mm
Extended Length [A+B]
19[9.9+9.1]”/493[250+233]mm
23.5[11.9+11.6]”/598[300+298]mm
27.3[13.7+13.6]”/697[350+347]mm
31.3[15.7+15.6]”/796[400+396]mm
35.2[17.7+17.5]”/896[450+446]mm
39.2[19.7+19.5]”/996[500+496]mm
43.2[21.7+21.5]”/1097[550+547]mm
47.1[23.7+23.4]”/1194[600+594]mm
Width
Thickness
1.7”/45mm
0.5”/12.7mm
Dimension
(Refer to the below table)
Extended Length
Pull Back
Thickness
Gap of Installation: 0.51” / 13mm
Original Length
1.7” / 45mm
0.5” / 12.7mm
Full Extend
Page 5
Size Table
A deviation of 0.2
”
/5mm may apply to the actual extended length.
A
B
Item Size
10’’/250mm
12’’/300mm
14’’/350mm
16’’/400mm
18’’/450mm
20’’/500mm
22’’/550mm
24’’/600mm
8
