Offset Drop Down Mount
Document Number 341-710 Rev. B
Page 3 of 4
Drop Down Series
Offset Drop Down Mount for Large PTZ Cameras
535-2000-294 (for Sony BRC Series Cameras)
535-2000-295 (for Panasonic AW-HE100 Camera)
535-2000-294
For Sony BRC Series Cameras
535-2000-295
For Panasonic Camera
Includes:
One (1) Offset Drop Down Mount for
Large PTZ Cameras
Camera
Platform
1” (1.315” OD) Offset Pipe
1.25” - 12 x 7/16” Hex Jam Nut
Two (2) 1/4”-20 x ½” Screws for Mounting
PTZ Cameras
Install
Guide
(Camera not included)
INSTALLING THE MOUNT AND CAMERA:
When locating the camera, consider viewing angles, lighting conditions, line of site obstructions and check for
vibration where the camera is to be mounted. Pick a location to optimize the performance of the camera. The
integrator is responsible for following building codes, determining the suitability of the building structure to carry
the load of the camera and mount, as well as to make sure that the camera is secured to the camera platform.
INTENDED USE:
These products were designed, built and tested for use indoors and to support the weight, size and shape of the
prescribed products only. Using these mounts for any other devices could damage that device and/or create
potentially unsafe operating conditions.
HARDWARE WARRANTY:
Please see the Vaddio website at
http://www.vaddio.com
for the Vaddio Statement of Warranty for all Vaddio
Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions,
Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and
Handling and Products Not Under Warranty. The Vaddio Warranty Statement supercedes all other published
warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio
website or through e-mail support at
support@vaddio.com
.
