WEBBi - Web Controller
Vaddio WEBBi - Web Controller - Document Number 342-0445 Rev B Page 15 of 24
System
The system menu is intended for firmware update operations associated with the WEBBi. The administrator can
select the new firmware file from a local or network drive. The ‘begin firmware update’ button is actuated once
desired firmware file is selected. The update process will include user notification of status.
Diagram: System Menu
Help:
The help menu provides general information on the WEBBi and is intended to assist the installer in
configuration and programming of the WEBBi. The help menu also includes information on the current firmware
release loaded on the device.
Camera Controls:
The Camera Controls page allows the installer to position the PTZ camera and store camera
presets within the Administrative pages. The camera controls page will mimic that of the Room UI page
presented to the user after installation.
Logout:
The logout menu function exists from the administrator pages within the web server.
Factory Default:
The WEBBi can be restored to factory defaults with the dip switches on the rear of the device.
Process for defaulting WEBBi to factory settings is:
Step 1:
Place all dip switches to the off position (down).
Warning: Current settings will be erased.
Step 2:
Press Reset on the front panel of the WEBBi. Device will reboot to factory settings.
