background image

BaseSTATION 

 

Vaddio BaseSTATION - Document Number 342-0756 Rev A

    

      

           Page 16 of 40 

 

Framing the BaseSTATION Video Shot 

 
When framing the shot with a BaseSTATION WideSHOT based camera, consider the following elements:   

 

The area should be well lit and without reflective surfaces.  For wall surfaces, use a flat paint or wall coverings 
to minimize audio reflections.  Use neutral colors, for example pale grey, pale blue or beige that are easy for 
any camera to process.  Avoid tough 1950’s colors like harvest gold or avocado green.   

 

Avoid white and black or a stark contrast color pallet, avoid placing a big old white board in the background, 
and avoid complex décor in view of the camera (modern art).  Avoid glass, chrome, mirrors, and glass on table 
tops to minimize the lighting and audio reflections.   

  Always avoid having a window in the camera shot as sunlight can be disruptive of camera performance.  

Window treatments are a must for rooms with windows to achieve evenly lit space without direct sunlight. 

 

Never position the camera so that any ceiling lights are in the video frame.  No one sits anywhere near the 
ceiling and direct lighting in the frame can be problematic for the automatic functions of the camera.   

The bottom line is simple, give the camera a chance to work well in the room and excellent video is the 
result.  There are many room set up primers available on today’s internet for reference. 

 

Drawing:  A Small Conference Room (10’ wide x 12’ long)  

Camera set at the wide end (82.2°). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Drawing:  A Bigger, Small Conference Room (12’ wide x 16’ long)  

Camera set at the wide end 82.2° (Lt. Blue)  
Camera reset to approx. 58° (Red) 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 

 

 

82.2° 

58.0° 

82.2° 

The BaseSTATION camera set to 
the full wide end of 82.2°, in this 
example, is too wide for this room 
and will not render any real detail 
such as facial expressions and other 
mannerisms of the meeting 
participants. 
 
The camera can be zoomed into a 
tighter shot (58° or tighter - rose 
colored viewing angle) allowing all 
the subjects in this room to be seen 
on camera while still providing the 
details needed for effective  visual 
communications.  
 
 

The HD camera is set to the full wide end of 82.2° 
(horizontal field of view) is an excellent choice for 
small (huddle) conferencing rooms that range from 
8’ (2.44m) to 12’ (3.66m) in width x depth.   
 
In this example, the table front is 4’ (1.22m) away 
from the camera and the camera can easily 
capture all of the meeting participants from this 
distance   
 
The camera can be manually zoomed into a tighter 
shot for a conference room with fewer participants 
as well.  

4’ (1.22m) 

12’ 

(3.66m)

10’ 

(3.05m)

16’ (4.88m)

12’ (3.66m) 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BaseSTATION









































Reviews: