BaseSTATION
Vaddio BaseSTATION - Document Number 342-0756 Rev A
Page 20 of 40
Screen Shot: VoIP RTP Settings
The RTP (Real Time Protocol) setting tab allows the administrator to configure the audio streaming function
associated with the VoIP user agent.
The components of the RTP Settings tab include:
RTP Port Range:
Sets the port range used for audio transports.
Codec Priority:
Allows the administrator to set the priority of audio codec to be used during call negotiations.
Available codecs include G.711 µLaw, G.711 aLaw, and G.722. The first in the list will be the preferred codec
to be used during the call negotiation. The codec types will change position with the up or down arrows that
are next to each setting.
Audio Processing
: Various audio processing functions are available for the VoIP call. This includes ability
to enable and set DTMF timing, voice activated detection (VAD) and comfort noise fill (CNF). The default
configuration should be adequate in most installations.
Important Note:
There is a VoIP Network Worksheet available t
o assist IT managers and system integrators
with installing the GroupSTATION, HuddleSTATION, or BaseSTATION VoIP conferencing platform into the enterprise
VoIP system. The worksheet will be available on the Vaddio website. It also is in the back of this riveting manual.
Click Save
when Finished
All manuals and user guides at all-guides.com