BaseSTATION
Vaddio BaseSTATION - Document Number 342-0756 Rev A
Page 29 of 40
Making a VoIP Call
Once the BaseSTATION is registered to the VoIP PBX/SIP Proxy by the network administrator or other qualified IT
or phone system personnel, the BaseSTATION functions surprisingly like a typical telephone set, which is cool.
Step 1:
Dial the desired number using the BaseSTATION Dock User Interface. The OSD will automatically pop-
up on the room’s LCD, at the top of the image, showing the number being dialed.
If the number is incorrect, pressing the Hang-up button will clear the number allowing re-entry.
Step 2
: Once the desired number is entered. Press the Send button. The OSD will indicate
that a call is trying to be established to the other party.
The OSD will display additional messages about the status of the call which includes Busy, Connected, or Error
and many other messages too.
Accepting a VoIP Call
Audible and visual indicators will be present with an inbound call. A ringtone will be heard from the loudspeakers.
In addition, the OSD will display a message that an inbound call is pending.
Call Acceptance:
To accept a call, the user presses the answer key.
Call Rejection:
The hang-up button can be pressed to reject the call.
17639714400
Dialing
Incoming Call
All manuals and user guides at all-guides.com