background image

BaseSTATION 

 

Vaddio BaseSTATION - Document Number 342-0756 Rev A

    

      

           Page 6 of 40 

 

Save These Instructions 

The information contained herein will help you install and operate your product.  If these instructions are misplaced, 
Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the 
Vaddio product line on the Vaddio website.  These documents can be downloaded from www.vaddio.com free of 
charge. 
 

Unpacking 

Carefully remove the device and all of the parts from the packaging.  Unpack and identify the following parts: 

 

BaseSTATION Deluxe System 999-8920-000 (North America)  

One (1) BaseSTATION HD Camera Module 
One (1) BaseSTATION Dock (Controller and Dialer) 
One (1) BaseSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable 
One (1) 24 VDC, 3.0 Amp Power Supply with North American Power Cable 
One (1) Premium Wall Mount with cable tray and mounting hardware 
One (1) 3.3’ (1m) USB 2.0 Cable Type-A to Type-B Micro 
One (1) 6’ (1.83m) HDMI Cable (video and audio to monitor) 
One (1) Installation and User Guide  
One (1) VoIP Worksheet  

 

BaseSTATION Deluxe System 999-8920-001 (International)

 

 

One (1) BaseSTATION HD Camera Module 
One (1) BaseSTATION Dock (Controller and Dialer) 
One (1) BaseSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable  
One (1) 24 VDC, 3.0 Amp Power Supply  
One (1) Euro Power Cable 
One (1) UK Power Cable 
One (1) Premium Wall Mount with cable tray and mounting hardware 
One (1) 3.3’ (1m) USB 2.0 Cable Type-A the Type-B Micro 
One (1) 6’ (1.83m) HDMI Cable (video and audio to monitor) 
One (1) Installation and User Guide 
One (1) VoIP Worksheet  
 

BaseSTATION Premier System 999-8925-000 (North America)  

One (1) BaseSTATION HD Camera Module 
One (1) BaseSTATION Dock (Controller and Dialer) 
One (1) BaseSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable 
One (1) 24 VDC, 3.0 Amp Power Supply with North American Power Cable 
One (1) Premium Wall Mount with cable tray and mounting hardware 
One (1) 3.3’ (1m) USB 2.0 Cable Type-A to Type-B Micro 
One (1) 6’ (1.83m) HDMI Cable (video and audio to monitor) 
One (1) Premium PC to BaseSTATION Dock Interface Cable   
One (1) Installation and User Guide  
One (1) VoIP Worksheet  

 

BaseSTATION Premier System 999-8925-001 (International)

 

 

One (1) BaseSTATION HD Camera Module 
One (1) BaseSTATION Dock (Controller and Dialer) 
One (1) BaseSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable  
One (1) 24 VDC, 3.0 Amp Power Supply  
One (1) Euro Power Cable 
One (1) UK Power Cable 
One (1) Premium Wall Mount with cable tray and mounting hardware 
One (1) 3.3’ (1m) USB 2.0 Cable Type-A to Type-B Micro 
One (1) 6’ (1.83m) HDMI Cable (video and audio to monitor) 
One (1) Premium PC to Dock Interface Cable   
One (1) Installation and User Guide 
One (1) VoIP Worksheet  
 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BaseSTATION









































Reviews: