A Quick Look at the Camera
n
Camera and zoom lens:
The ConferenceSHOT 10 camera features a 10X optical zoom lens (11X in
Super-Wide mode).
n
IR sensors:
Sensors in the front of the camera base receive signals from the remote. Make sure there's
nothing directly in front of the camera base, and point the remote at the camera.
n
Status light:
The multi-colored LED indicates the camera's current state.
Back of the Camera
n
12 VDC, 3.0 Amp power connector
– Connect only the power supply shipped with the camera.
n
USB 3.0 type B video device connector
– Streams uncompressed UVC standard video
n
Ethernet RJ-45
– Connect to the network for IP streaming and camera control via web interface or
Telnet
n
DIP switches
– Set IR frequency, IR on/off, and image flip (camera is invertible)
n
RS-232 port
– Connect to a controller to manage the camera using a modified VISCA protocol.
2
Configuration and Administration Guide for the ConferenceSHOT 10 Enterprise-Class PTZ Conferencing Camera
