Camera Behavior Settings
The camera uses DIP switches to determine certain camera functions.
Note
When the camera is not inverted, DIP switches are in their default positions when they are up.
IR Frequency Selection (switches 1 and 2):
The IR Remote Commander can control up to three
cameras in the same room with different IR frequencies. Use
IR Settings
switches 1 and 2 to select the
frequency to identify the camera as camera 1, 2, or 3; then use the Camera Select buttons at the top of the
remote to select the camera you want to control.
n
SW1 and SW2 up: IR frequency 1
n
SW1 down, SW2 up: IR frequency 2
n
SW1 up, SW2 down: IR frequency 3
Image Flip (switch 3):
If mounting the camera upside-down, set Image Flip ON. This orients the video
image correctly.
Switch 4
is not currently used.
A label on the bottom of the camera provides a quick reference for setting the DIP switches.
RS-232 Serial Communication Settings
The RS-232 serial port (RJ-45, color-coded blue) on the camera's back panel enables third-party control.
Parameter
Value
Communication Speed
9600 bps or 38400 bps, switch-
selectable
Number of start bits
1
Number of stop bits
1
Number of data bits
8
Parity
None
Flow control
None
7
Installation Guide for the ConferenceSHOT FX USB 3.0 Fixed Camera