Installation
This section covers:
n
Selecting the location for the camera
n
Installing the mount
n
Connecting the camera (and speaker, if purchased)
n
Mounting the camera (and speaker, if purchased)
And a required safety note here:
Note
PoE type networks connected to this equipment are for intra-building use only and should not be connected
to lines that run outside of the building in which this product is located.
Don’t Void Your Warranty!
Caution
Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm
will damage it.
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Caution
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
Before You Install the Camera
Things to keep in mind when deciding where to install the camera:
n
Consider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions
where the camera is to be mounted.
n
Ensure that the camera body can move freely and will normally point away from the ceiling and lights.
The camera will not perform well if it is pointed toward a light source such as a light fixture or window.
n
If the remote will be used, ensure that nothing blocks the IR lens in the camera's base.
Prepare for a successful installation:
n
Be sure you can identify all cables correctly.
n
Check Cat-5 cables for continuity.
n
Talk to the network administrator. If installing the camera in a non-DHCP network (one that does not
automatically assign IP addresses), you will need to configure the camera with a static IP address as
directed by the network administrator.
11
Installation Guide for ConferenceSHOT AV Enterprise-Class Conferencing System
