Powering Up the Camera
Connect camera power. The status light illuminates purple as the camera initializes. When the camera is
ready and a video stream is available, the light changes to blue.
Turn and tilt the camera as needed to position it for the desired view.
Status Indicator Light
The light in the camera's base indicates its current state.
n
Blue – Camera is active
n
Purple – Standby mode or booting
n
Yellow – Firmware update is in progress
n
Blinking blue – USB cable is disconnected (UC color scheme)
Caution
Do not remove power or reset the camera while the indicator is yellow, showing a firmware update in
progress. Interrupting a firmware update can make the camera unusable.
Note
By default, the camera's status indicator light is active during normal operation; however, it can be
configured to remain off when the camera is powered up. The camera may be sending video even if the light
is off.
11
Installation Guide for the ConferenceSHOT FX USB 3.0 Fixed Camera