If the Camera Is At 169.254.1.1
This is the camera's default IP address. This means one of these things:
n
The camera is not connected to the network.
n
The network does not automatically assign IP addresses, and you need to configure the camera for the
network.
To communicate directly with the camera, connect a cable from your computer's network port to the
camera's network port.
After you have done the initial device set-up, you will need to configure the camera for the network.
Initial Access to the Web Interface
Enter the camera's IP address in your browser's address bar. You may need to enter
https://
as a prefix
to keep the browser from treating it as a search query. (Example:
https://10.30.200.125
)
HTTP access is disabled initially.
This is also true after restoring factory defaults.
When you access
the web interface without using the
https://
prefix, you may encounter this message:
Switch to HTTPS if you see this message.
17
Installation Guide for the ConferenceSHOT FX USB 3.0 Fixed Camera
