Using the Remote Control
The remote provides basic camera control.
Quick Reference
What do you need to do?
Button(s)
Power on or standby
Power
(button at top right)
Select the camera to control (if this remote controls
more than one)
IR 1
,
IR 2
, and
IR 3
buttons
Discover the camera's IP address
OSD
button (top left) – press and hold for 3
seconds
Return the camera to its home zoom position
OK
button
Move the camera to a preset zoom
Preset 1
and
Preset 2
buttons (lower left)
Change zoom
Zoom Out
and
Zoom In
buttons
Details
The remote provides the following functions:
OSD
(On-Screen Display) – Press and hold for 3 seconds to display the camera’s IP
address and MAC address on the near-end display. Press momentarily to dismiss
the information.
Power indicator
– Shows power on, IR transmission, and battery level.
Power
– Switch the selected camera on or off.
Arrow buttons
– Non-functional, so they're perfect for fidgeting.
OK
– Return to the camera's home zoom level.
Zoom Out
and
Zoom In
– Change the zoom.
P-Store
– Preset store. Hold while pressing Preset 1 or Preset 2 to store a preset.
Preset 1
and
Preset 2
– Zoom the camera to a preset zoom level. Presets may
include color settings if defined through the web interface, which provides access to
16 presets.
IR 1
,
IR 2
, and
IR 3
– In multi-camera installations, selects the camera to be
controlled.
Storing a Preset Using the Remote
Zoom to the desired level. Then hold down the
P-Store
button while pressing
Preset
1
or
Preset 2
.
9
Integrator's Complete Guide to the ConferenceSHOT FX USB 3.0 Fixed Camera
