Page 3 of 7
Firmware Update Instructions
– EasyUSB Mixer/Amp
Requirement
•
USB to Serial Adapter.
•
Vaddio EZCamera Control Adapter (part # 998-1001-232).
•
Cat-5 or better cable to connect the distance between PC and EasyUSB Mixer/Amp interface
•
A PC with the following downloaded onto it:
o
The latest version of the Vaddio Loader program (available at
http://www.legrandav.com/tools_and_training/tools/vaddio_tools
).
o
The firmware file, located on the EasyUSB Mixer/Amp’s product page.
Step-By-Step Process
1.
Connect the PC and the EasyUSB Mixer/Amp:
-
Plug the USB to Serial Adapter into a USB port on the PC.
-
Connect the Vaddio EZCamera Control Adapter to the USB to Serial Adapter via their 9-pin
connectors.
-
Connect your Cat-5 or better cable to the RJ-45 port on the EZCamera Control Adapter.
-
Connect the other end of your Cat-5 or better cable to the RS-232 port on the EasyUSB
Mixer/Amp.
Example connection diagram
– your cable colors may be less fun.
2.
Open Vaddio Loader on the PC and choose the COM port you have connected to the EasyUSB
Mixer/Amp if prompted (if not prompted, you can check or change which is selected by going to File ->
Setup COM#).
EZCamera
control adapter
USB to serial
Cat-5
