Page 6 of 7
10.
Choose ‘Select Load File’ and select the firmware file for the EasyUSB Mixer/Amp you downloaded from
the Mixer/
Amp’s product page.
11.
Click ‘Start’ to initiate the firmware update. An update can take around 5 minutes to complete. The
squares in the bottom right corner should flash and the progress bar on the bottom should start to fill in.
Do not disconnect any cabling until Vaddio Loader indicates a successful firmware load
.
Caution
Do not disconnect power or the serial cable during the update. Interrupting the update can make the
Mixer/Amp non-functional. If this happens, the unit must be returned to Vaddio for service.
During the update, the Mixer/Amp's power indicator blinks. The progress bar at the bottom of the Vaddio
Loader box...displays progress.
While you’re waiting, you could try the following:
•
Make a list of planets and other objects in the solar system, in the order in which you would like to
visit them.
•
Learn 10 words of an unfamiliar language.
•
Think of three wishes, just in case a mythical being shows up and offers to grant you three wishes. Be
prepared!
