camera zoom
Moves the camera in toward the subject or out away from the subject. (See
.)
Auto-framing pauses when the camera receives this command.
Synopsis
camera zoom { in [<speed>] | out [<speed>] | stop | get | set <position> [<speed>] [no_
wait] }
Options
in
Zooms the camera in.
out
Zooms the camera out.
speed
[1 - 7]
Optional: Specifies the zoom speed as an integer.
stop
Stops the camera's zoom movement.
get
Returns the camera's zoom setting.
set
<zoom>
Sets the camera's zoom level; snaps to the requested
zoom unless speed is specified.
no_wait
Optional; when camera zoom set specifies a speed,
allows the command to return the command prompt
immediately, while the command is still in progress.
Examples
>
camera zoom in
OK
>
Zooms the camera in at the default speed.
>
camera zoom out 7 no_wait
OK
>
Zooms the camera out using a speed of 7. The command prompt is available
immediately.
>
camera zoom stop
OK
>
Stops the camera's zoom motion.
>
camera zoom set 3
OK
>
Sets the camera’s zoom to 3x. The camera snaps to this zoom level because no speed
is given, so the no_wait parameter is not needed.
50
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
