Speed Adjustments
C
AMERA PAGE
The following speed adjustments are available:
n
Manual pan, tilt, and zoom speeds – Used when you control camera movements with the IR Remote
Commander or the arrow buttons in the web interface
n
Global Preset Non-Tri-Sync Speeds – Separate pan, tilt, and zoom speeds used for movements
between presets that do not use Tri-Synchronous Motion.
n
Tri-Synchronous Motion speed – Only available when storing a preset with the Store with Tri-Sync
option selected.
About Tri-Synchronous Motion
The Tri-Synchronous Motion algorithm calculates the pan, tilt and zoom speeds needed for the camera to
move to a preset position, so that all three movements begin together and arrive at the same time. It
ensures smooth on-air movements when making large changes in position, particularly when the zoom also
changes. Tri-Synchronous Motion is only available as an option for moving to specific preset position.
Tri-Synchronous Motion is not helpful in movements of less than 10°, and is typically used only for on-air
operation.
Setting the Speed for Manual Movements
C
AMERA PAGE
The Pan Speed, Tilt Speed, and Zoom Speed sliders control how fast the camera moves in response to the
direction and zoom controls on the IR remote and in the web interface.
To set speeds for movements using the arrow buttons:
Use the speed sliders to adjust the speed of movements that you control with the buttons for pan, tilt, and
zoom. For tight shots, slower is usually better.
56
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
