camera ccu set
Sets the specified CCU (lighting and color) information.
Synopsis
camera ccu set <param> <value>
Options
auto_white_balance
{on | off}
Sets the current state of the auto white balance
setting (on or off). Auto white balance overrides
red gain and blue gain manual settings.
red_gain
<0 – 255>
Sets the red gain value as an integer (0 to 255).
Can only be used when auto white balance is
off.
blue_gain
<0 – 255>
Sets the blue gain value as an integer (0 to
255). Can only be used when auto white
balance is off.
backlight_compensation
{on
| off}
Sets the current state of the backlight
compensation setting (on or off). Can only be
used when wide dynamic range mode is off.
iris
<0 – 11>
Sets the iris value as an integer (0 to 11). Can
only be used when auto-iris is off.
auto_iris
{on | off}
Sets the auto-iris state (on or off). Auto-iris
disables manual iris and gain when it is on.
gain
<0 – 11>
Sets gain value as an integer (0 to 11). Can
only be used when auto-iris is off.
detail
<0 – 15>
Sets the detail value as an integer (0 to 15).
chroma
<0 – 14>
Sets the chroma value as an integer (0 to 14).
gamma
<-64 – 64>
Sets the gamma value as an integer (-64 to 64).
wide_dynamic_range
{on | off}
Sets Wide Dynamic Range mode on or off.
Can only be used when backlight
compensation is off. This parameter is not valid
for RoboSHOT 30 HDBT.
Examples
>
camera ccu set auto_iris off
OK
>
Turns off auto-iris mode, returning the camera to manual iris control.
>
camera ccu set red_gain 10
OK
>
Sets the red gain value to 10.
72
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
