Canon BU Series PTZ Camera Systems
Canon BU-Series PTZ Camera Installation and User Guide 341-909 Rev. B
Page 2 of 8
UNPACKING
BU-46H System:
Carefully remove all of the parts from the packaging. Unpack and identify the following parts:
•
One (1) Canon BU-46H PTZ Camera
•
One (1) 12V PowerRite™ Power Supply with AC Cord Set (US or Euro and UK)
•
One (1) RS-232 to RS-422 Converter (998-1000-422)
•
One (1) RJ-45F to DB-9 Adapter (998-1005-232)
•
One (1) RJ-45F to DB-9 Adapter (998-1003-232)
•
One (1) RJ-45F to 12-pin Adapter
•
One (1) 3’ Cat. 5e Patch Cable (341-192)
•
One (1) Vaddio Manual
•
One (1) Canon BU-46H Manual
Figure 2:
BU-46H Connected to Vaddio ProductionVIEW Precision Camera Controller
Basic Connectivity of the BU-46H Outdoor PTZ System:
The Vaddio/Canon BU-46H PTZ system uses a Cat. 5e for RS-232/RS-422 control to the camera. The RS-232 to RS-422 is
port powered and it is recommended to be located close to the control source. While the Cat. 5e cable can be run up to 500’
(152.4m) from the camera, the Canon BU-46H is rated for a distance up to 246’ (75m). See Appendix 1 for wiring and pin-out
information.
12 VDC, 10.0Amp
Power Supply
Canon BU-46H
PTZ Camera
Up to 500’
(152.4m)
of Cat. 5e
for Control
RS-422 Cat. 5e to
the RJ-45 to 12-pin
adapter input on the
BU-46H Camera
ProductionVIEW Precision Camera Controller
3 ft. Cat. 5e
RS-232
DB9F to RJ-45F
RS-232 to RS-422
Adapter
RS- 232 to
RS-422
Converter
RJ-45F to DB-
9M Adapter
Coax Cable for HD-SDI
See Canon Manual for
Distance Limits
To House HD-SDI
Switcher
