ProductionVIEW FX - Firmware Version V02.01.07
ProductionVIEW FX Manual 341-451 Rev. B
Page 9 of 18
ProductionVIEW FX Menu Structure
The ProductionVIEW FX has a back lit, 2-line LCD that displays
the system menus. The menus are traversed with the up/down
arrows, select and cancel buttons. The menu structure is as
follows:
1
st
Screen
ProductionVIEW
FX
V02.01.0X (software version 0X)
Transition Menu
>Select
>Effect Select: Selected transition, or transition in use, will be the first transition displayed
None
Corner
UL
→
BR
Corner Wipe, Upper Left to Bottom Right
Corner BR
→
UL
Corner Wipe, Bottom Right to Upper Left
Vertical B
→
T
Vertical Wipe, Bottom to Top
Vertical T
→
B
Vertical Wipe, Top to Bottom
Horiz
L
→
R
Horizontal Wipe, Left to Right
Horiz
R
→
L
Horizontal Wipe, Right to Left
Crossfade Crossfade
between
Camera
Inputs
Selected transition, or transition in use, will be the first transition displayed
>Time
Interval
0.0 -4.0 Transition Timer, 0.0 to 4.0 seconds
>Main Off Time
0.0 – 4.0 Main off Fade to Black Timer, 0.0 to 4.0 seconds
>Return to Main
>Select
Returns
to
Main
Menu
Rescan Video
>Select
>Start - Rescans video inputs 1 through 6, Use if video inputs are changed or reconfigured, S-Video has priority
Rescan Cameras
>Select
>Start - Rescans control ports 1 through 6 to find the cameras connected
Default Camera
(Automatic and Start-up Modes)
>Select
> 01 – 06
Selects camera 1 through 6 as the default camera (default is 01)
Default Preset
(Automatic and Start-up Modes)
>Select
> 01 – 12
Assigns camera preset 1 through 12 as Default Preset on the default camera (default is 01)
Pan Sensitivity
>Select
>01 - 24
Adjusts the sensitivity of the Pan command from the
joystick (default is 24)
Tilt Sensitivity
>Select
>01 - 24
Adjusts the sensitivity of the Tilt command from the joystick (default is 24)
Def Idle Rtn (Automatic Mode only)
>Select
>00 – 60
Default Camera Idle Return Timer - with no other trigger input, the system returns to the Default Camera and
Default Preset after this time elapses (default is 10, 00 disables function)
Menu
Section
