WallVIEW 50i HideAway – Document 341-141 Rev. C
Page 10 of 14
Inquiry
Packet Inquiry
Packet Reply
Description
Y0 50 02 FF
On
CAM_Powering
8x 09 04 00 FF
Y0 50 03 FF
Off
CAM_ZoomPosInq
8x 09 04 47 FF
Y0 50 0Z 0Z 0Z 0Z FF
ZZZZ: position
Y0 50 02 FF
Auto
CAM_FocusAFModeInq
8x 09 04 38 FF
Y0 50 03 FF
Manual
CAM_FocuPosInq
8x 09 04 48 FF
Y0 50 0Z 0Z 0Z 0Z FF
ZZZZ: position
Y0 50 02 FF
On
CAM_BacklightModeInq
8x 09 04 33 FF
Y0 50 03 FF
Off
WWWW: pan
Pan-tiltPosInq
8X09 06 12 FF
Y0 50 0W 0W 0W 0W 0Z
0Z 0Z 0Z FF
ZZZZ: tilt
Do not attempt to take the camera module apart (other than for the
reasons stated in the manual). There are no user-serviceable
components inside.
•
Do not spill liquids onto the camera
•
Keep this device away from food and liquid
•
Avoid touching the lens
•
For smears or smudges, clear any dust with a blower and
wipe stains with a glass cleaner and clean, soft cloth.
•
To clean exterior of camera, wipe with a clean soft cloth. Do
not use any abrasive chemicals.
Do not store or operate the WallVIEW 50i PTZ HideAway under the
following conditions for any circumstance:
•
Temperatures above 40°C (104°F)
•
Temperatures below 0°C (32°F)
•
High humidity, condensing or wet environments
•
Dusty
environments
•
In inclement weather
•
Under severe vibration
Inquiry
Command
CARE AND
CLEANING
OPERATING
AND STORAGE
CONDITIONS
