background image

 

WallVIEW 50i HideAway – Document 341-141 Rev. C 

 

    Page 12 of 14 

 

Hardware* Warranty -

 One year limited warranty on all parts.  Vaddio warrants 

this product against defects in materials and workmanship for a period of one 
year from the day of purchase if Vaddio receives notice of such defects during 
the warranty.  They will, at its option, repair or replace products that prove to be 
defective. 
  

Exclusions

 - The above warranty shall not apply to defects resulting from: 

improper or inadequate maintenance by the customer, customers applied 
software or interfacing, unauthorized modifications or misuse, operation outside 
the normal environmental specifications for the product, use of the incorrect 
power supply, or improper site operation and maintenance.  
 

Vaddio Customer service

 – Vaddio will test, repair, or replace the product or 

products without charge if the unit is under warranty.  If the product is out of 
warranty, Vaddio will test then repair the product or products.  The cost of parts 
and labor charge will be estimated by a technician and confirmed by the 
customer prior to repair.  All components must be returned for testing as a 
complete unit.  Vaddio will not accept responsibility for shipment after it has left 
the premises.  

 

Vaddio Technical support 

- Vaddio technicians will determine and discuss with 

the customer the criteria for repair costs and/or replacement.  Vaddio Technical 
Support can be contacted through one of the following resources:  e-mail support 
at 

support@vaddio.com

 or online at 

www.vaddio.com

 

Return Material Authorization (RMA) number  - 

Before returning a product for 

repair or replacement request an RMA from Vaddio’s technical support.  Provide 
a technician with a return phone number, e-mail address, shipping address, and 
product serial numbers.  Describe the reason for repairs or returns as well as the 
date of purchase.  Include your assigned RMA number in all correspondence 
with Vaddio.  Write your assigned RMA number on the outside of the box when 
returning the product.  

 
Voided warranty

 – The warranty does not apply if the original serial number has 

been removed or if the product has been disassembled or damaged through 
misuse, accident, modifications, or unauthorized repair.  
 

Shipping and handling

 - Vaddio will not pay for inbound shipping transportation 

or insurance charges or accept any responsibility for laws and ordinances from 
inbound transit.  Vaddio will pay for outbound shipping, transportation, and 
insurance charges all items under warranty but will not assume responsibility for 
loss and/or damage by the outbound freight carrier. 

  If the return shipment appears damaged, retain the original boxes and 

packing material for inspection by the carrier. 

 

o

  Contact your carrier immediately.

 

 
Products not under warranty

 - Payment arrangements are required before 

outbound shipment for all out of warranty products. 
 

*Vaddio manufactures its hardware products from parts and components that are new or equivalent 
to new in accordance with industry standard practices. 

 

 
 
 
 

WARRANTY 
INFORMATION

 

Summary of Contents for WallVIEW 50i















Reviews: