WallVIEW CCU HD-18 HD-SDI
WallVIEW CCU HD-18 HD-SDI Manual 341-988 Rev. A
Page 3 of 26
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
•
One (1) ClearVIEW HD-18 PTZ Camera
•
One (1) Quick-Connect CCU Interface for HD-18
•
One (1) IR Remote Control
•
One (1) EZIM HD-SDI Slot Card for HD-18
•
One (1) Wall Mount and Hardware
•
One (1) RJ-45 to DB-9 Adapter
•
One (1) Vaddio PowerRite 36 VDC, 2.78 Amp Power Supply
•
One (1) AC Cord Set (US - North America - or - UK and Europe - International)
•
Documentation and Manuals
THE COMPONENTS:
•
The
Camera
1.
Camera – A 1/3”, 1.3 megapixel HD image sensor is combined with an 18x optical zoom lens, for
capturing high-quality video.
2.
Tally Light – A tally light is illuminated when the camera receives a VISCA command or from the
CCU tally port on the back of the Quick-Connect CCU.
3.
IR Sensors – Dual IR sensors are built into the front of the WallVIEW CCU HD-18 HD-SDI to
receive IR signals from the IR remote control supplied with the camera.
4.
Power Light – A power light is illuminated when the camera is turned on.
Compatible Switchers and Joystick Controllers
(not included in this package):
Figure 2:
ClearVIEW HD-18
PTZ Camera (front)
ProductionVIEW HD-SDI
(999-5650-000/001)
Precision Camera Controller
(999-5700-000/001)
1
2
4
3
