WallVIEW CCU HD-20 HD-SDI
WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A
Page 14 of 24
General Specifications:
WallVIEW CCU HD-20 HD-SDI
Part Numbers
WallVIEW CCU HD-20: 999-6957-000 (North America)
WallVIEW CCU HD-20: 999-6957-001 (International)
Vaddio ClearVIEW HD-20
Image Device
6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor
Picture Elements
3.27M pixels (Effective)
HD Resolutions
1080/60i, 1080/50i, 720/60p, 720/50p, 1080/30p and 1080/25p (SD Resolutions Not Supported)
Lens
20x Optical Zoom, 11-Element HiLD™ (High Index Low Dispersion) Glass
Focal Length
F=4.7mm wide end to 94mm tele end
Horizontal Viewing Angle
2.9° tele end to 55.2° wide end (16:9 format)
Invertible
Yes - With No Frame Delay
Video S/N Ratio
>50 dB
Minimum Illumination
1.6 LUX (F1.6, 50IRE)
Serial Control Protocol
RS-232 (Modified VISCA)
Min. Object Distance
Wide End: .01m wide end, Tele end: 1.0m
Pan Range
+170 degrees to -170 degrees
Tilt Range
+90 degrees to -30 degrees
HD Video Select
16-Position Rotary Switch: Used to set HD Video Resolution Output
Camera Settings
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished Functions
Preset Positions
16 (internal), 6 recalled via IR Remote
Dimensions/Weight
7.81” (198.37mm) x 6.67” (169.42mm) x 7.057” (179.25. mm), 5.61 lbs. (2.54011744 kg.)
Quick-Connect CCU
Connectors
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZIM HD-SDI Slot Card
RS-232 IN RJ-45: Accepts RS-232 (bi-directional) controller information
RS-232 OUT RJ-45: Sends RS-232 (bi-directional) to camera
G/L OUT: NA
TALLY: 2-Pin Phoenix type spring cage connector
BNC Connector for Sync (not available on HD-20)
Video Outputs: Not used in this system configuration
Video RJ-45: Not used in this system configuration
Controls
Scene: (A, B and C), Detail, Red Gain, Blue Gain, AWB, Shift key between Pedestal and Knee, Chroma,
Gamma, Iris (Auto, Manual) and Gain
Camera Select Switch
All switches should be in the down position for HD-20
Video Adjustments
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+ (Not used in this system configuration)
Cat-5e Cable Distance
Up to 500’ (152.4m)
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount - 1.75” (43.688) H x 18.93” (480.822mm) W x 6” (152.4mm) D
Thin Profile Wall Mount HD-20
Materials
12-Gauge CRS with Black Powder Coat Paint
Dimensions
5.125” (130.175mm) H x 6.75” (171.45mm) W x 10” (254mm) D
Weight
Approx. 2.4 lbs. (1.08862176kg)
HD-SDI Slot Card
Part Number
998-6900-007
Power Jack:
One (1) RJ-45, 36VDC used to Power Quick-Connect CCU over Cat-5e
HD-SDI Output:
Two (2) Outputs on BNC Connectors (Carrier Class, Gold Finish Body and Contacts, Circuit Board Edge
Mount)
Slot Card Connection
One (1) 24-pin Self Guiding Blind Mating Interface Connector
HD-SDI Transmitter
High Speed HD-
SDI/SDI transmitter, with integrated low noise VCO and integrated cable driver (polarizing
imaging inducer not included)
Dimensions: With
Connectors
and
Mounting Plate: 5.875” (149.23mm) W x 4.25” (107.95) D
Weight:
0.3lbs (.13607772 kg)
