WallVIEW CCU HD-20 HD-SDI
WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A
Page 4 of 24
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts for 999-6957-000:
•
One (1) ClearVIEW HD-20 HD Camera
•
One (1) Vaddio IR Remote Commander
•
One (1) Quick-Connect CCU Interface
•
One (1) EZIM HD-SDI Slot Card
•
One (1) 36 VDC, 2.78A Power Rite™ Switching Power Supply
•
One (1) 998-1001-232 EZCamera Control Adapter (for control systems)
•
One (1) Thin Profile Wall Mount with Mounting Hardware
•
One (1) AC Cord Set for North America
•
Documentation
(Note: The 999-6957-001 Int’l Version includes the Euro and UK power cables)
ClearVIEW HD-20 PTZ Camera, Front View with Feature Call-outs:
1) Camera and Zoom Lens:
The 20X optical zoom lens is built around a 6.49mm diagonal (1/2.8 Type) high-speed CMOS image sensor with
a total of 3.27M pixels for truly precise HD video image acquisition.
2) Red Tally Light:
A red tally light is illuminated when the camera receives a VISCA command from an external control system.
3) IR Sensors:
IR sensors are built into the front of the ClearVIEW HD-20 to receive IR signals from the IR remote control
supplied with the camera.
4) Blue Power Light:
A Vaddio blue power light is illuminated when the camera is turned on.
Compatible Vaddio Switchers and Joystick Controllers:
ProductionVIEW™ HD-SDI
(999-5650-000)
Precision Camera Controller
(999-5700-000)
②
①
③
④
