WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 9 of 14
GENERAL SPECIFICATIONS
WallVIEW HD1 System
System Part Numbers
999-6305-000 NTSC
999-6305-001 PAL
Quick-Connect Interface
Connectors
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
IR: 2-Pin Phoenix type spring cage connector
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) or SD
Video RJ-45: Transports HD or SD video from camera depending on camera selection switch position
Camera Select Switch
8-Position DIP switch loads camera profiles and IR Forwarding for Polycom and TANDBERG Codecs
Video Adjustments
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
Compatible Cameras
Sony BRC-H700, BRC-Z700, EVI-HD1, BRC-300, (EVI-D70, EVI-D100 also in SD Mode)
Polycom EagleEye
Max. Cat. 5 Cable
Distance
Up to 500’ (152.4m) for Video Power and Control
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount (1.75” H x 19” W x 6” D)
EZCamera Interface Module
Connectors
Four (4) RJ-45 Connectors
One DB-25 for Power, Video, Control & IR
Cable Assemblies
For Sony HD Cameras: DB-25M to DB-15HD/8-Pin Mini Din x 2/EIAJ4 Power Connector
For Sony SD Cameras: DB-25M to RCA-M/4-Pin Mini Din/8-Pin Mini Din x 2/EIAJ4 Power Connector *
* SD Break-out cable
Power Regulator
Supplies 12VDC to Cameras
Dimensions
Approx. (3.035” H x 4.46” W x 1.242” D)
CAMERA SPECIFICATIONS
Sony EVI-HD1 Camera Basic Specifications
Camera Part Number
EVI-HD1
Image Sensor
1/3-type CMOS
Effective Pixels
Approx 2-Mill Pixels (16:9)
Signal Systems
NTSC and PAL
Video Resolutions
HD: 1080i (59.94/50), 720p (59.94/50),
SD: 480i, 576i
Lens
10X Optical, 4X Digital, 40X total
Horiz. Viewing Angle
8° tele to 70° wide (16:9)
Weight
Approx. 4 lbs 7 oz (2kg)
Dimensions
Approx 10.25” W x 6” H x 6.75” D
(259mm x 150mm 169mm)
