ZoomSHOT 20 QDVI Camera System
ZoomSHOT 20 QDVI System - Document Number 342-0966 Rev A
Page 10 of 20
V
ADDIO
IR
SHOT
C
OMMANDER
R
EMOTE
Spatially Efficient IR Remote Controller for ZoomSHOT™ 20 and WideSHOT™ Camera Systems
The Vaddio IR SHOT Commander was designed to work with the Vaddio ZoomSHOT and WideSHOT camera
systems and is compatible with the PowerVIEW™, ClearVIEW™ cameras The Vaddio IR SHOT Commander is
compatible with the following Vaddio camera packages:
ZoomSHOT 20 and WideSHOT Camera Systems (shipped with these products)
Vaddio ClearVIEW, HD-20
SE
, PowerVIEW HD-22 and HD-30
The Vaddio IR Shot Commander is also compatible with the Sony® EVI series and the BRC series PTZ cameras.
Image: Vaddio IR SHOT Commander Hand-held IR remote
(Top View)
ZOOM OUT ZOOM I
P-STORE IR 1
PRESET 1
Power On/Off
Camera Standby
OSD - On Screen
Display Menu
Arrow Keys X 4
Pan Left, Pan Right,
Tilt Up, Tilt Down
Menu Navigation
OK, Enter, Select and
Camera Home
Zoom Camera IN (telephoto)
Zoom Camera OUT (wide)
Recalls ZoomSHOT Preset 1
or Preset 2 (zoom position)
*WideSHOT uses a manual lens
Select IR Frequencies (3)
Allows up to 3 cameras to
be controlled in a room with
one (1) IR Remote
Note: Camera dip switches
set IR frequency.
Preset Button - Setting Presets
Move the camera into position
Push and hold P-STORE button
Touch buttons 1 or 2 to set Preset
Quick Specs
IR Range
20’ to 30’ (6m to 9m)
Batteries
2 x AAA (Batteries not
shipped with 998-2101-001)
Keys (buttons)
15 Silicone Rubber Keys
Dimensions
L x W x H
4.53” (115mm) x 1.57”
(40mm) x 1.1” (28mm)
LED Indicator
Red LED Illuminates when
transmitting IR, Brightness
indicates battery strength
Compatible
Cameras
Ships with ZoomSHOT and
WideSHOT. Compatible with
all Vaddio ClearVIEW,,
PowerVIEW cameras (limited
function set) and most Sony
BRC & EVI cameras.
Red LED indicates IR transmission and
the brightness indicates battery strength
