RD 300-450 F
Ver.1.3 07/06/01
45
3.15.5 PTO driven hydraulic fan, mftg. no. 10 199-10 949 (accessory)
The fan is designed to be driven at a PTO speed of 1000 rpm. The upper alarm limit of the control
box is for a fan speed set to 4800 rpm, which is reached at approx.1100 rpm of the power connec-
tor. The maximum permissible fan speed is 5000 rpm.
Press button 18 to show the fan speed on the control box.
The fan speed alarm of the control box has been preset at the factory to min. 3800 rpm and max.
4800 rpm. The alarm levels can be adjusted from the control box. See ”3.16.3 Programming the
Type III Control Box” on page 54.
NOTE!
During operation, the oil can become very hot (more than 80ºC)!
Prior to starting
!
Check that all hoses and screws are secure.
!
Check that the oil level is within the upper half of the inspection glass.
!
Check that the pump is properly mounted and that the torque rod is securely fitted.
!
Check that all hoses are free from damage and ensure that they hang properly.
Normal start-up:
Always start the fan when the tractor is idling and let it run for a while until all hoses, the pump
and engine have warmed up. Do not start the fan while the tractor is under operating power. Cold,
viscous oil and pressure peaks will inevitably shorten the service life of the system.
Figure 3.42
Figure 3.43
Summary of Contents for RAPID RD 300 F
