Instructions and settings
38
Ver.07/06/01 07/06/01
3.12 Prior to filling the hopper
Check that:
!
the machine is empty, clean and dry
!
the seed housing is set as shown in the Sowing Table.
!
the emptying hatch is closed.
3.12.1 Filling from bulk sacks
Figure 3.30
NOTE!
Pay attention to safety. Do not walk under a suspended load! Make sure there is nobody on
the drill when feeding the seed. Use of an extension handle on the knife blade is recommended.
Make sure there is nobody on the hopper.
Mfg. no. -10 309:
Figure 3.31
If possible, fill from the side with the wing in the retracted position
(RD 400-450), or diagonally from the front with the tractor turned away from the drill. When fil-
ling from behind, it should be done diagonally from the right to allow access to the platform wit-
hout having to pass under the lifting arm.
Summary of Contents for RAPID RD F Series
