RDA 500-800 S
Ver.2 01.11.2002
77
5.3
Drive wheel transmission
Figure 5.8
Remove the chain casing and check the tension in the chain and the condition of the chain. Grease
the chain every 200 ha.
5.4
Locking device
Figure 5.9
Grease the locking device regularly. Use grease on the angled surface of the locking bar and
around where the bar is in contact with the hopper.
5.5
Push rod/ push rod ram
Figure 5.10
Dismantle the push rod at the end of the season and grease the threaded ends of the rod and the
cylinder. Measure the total length of the push rod unit before dismantling it so that it can be reas-
sembled to the correct length. Ensure that both ends of the rod are unscrewed to the same extent
when re-fitting.
Summary of Contents for RAPID RDA S Series
