- 3 -
2. Product Specification
Type：VH-1500
Dimensions：145mm(H)*170mm(D)*135mm(W)
Weight：1.1kg
Electrical Ratings
Supply voltage：100-120Vac ~1.6A or 200-240Vac ~0.8A
(Please refer to the mark on device.)
Supply Frequency：50/60Hz
Sine Wave Max. power supply: 180W
Device disconnection：pull out the power cord of this device from
socket.
Max. operating pressure：20kpa
Warm-up time：less than 30min.
This device life cycle is 3 years.
Transport condition：-10 to +55℃
(Humidity RH: 5%~95%，without any water condensation)
Storage condition：-20 to +65℃
(Humidity RH: 5%~95%，without any water condensation)
Suggested operating environment temperature: 18~26°.
Suggested operating environmental pressure: 700~1060 hPa.
Humidity Output: >33mg/l within recommended flow range.
Standard Compliance：EN/IEC-60601-1，EN-60601-1-2
Classified as：Class I, Type BF, IPX1
Definitions of symbols
Definitions of symbols
Definitions of symbols
Definitions of symbols
TYPE B
TYPE B
TYPE B
TYPE BFFFF Applied Part
Applied Part
Applied Part
Applied Part
(Inhalation tube)
(Inhalation tube)
(Inhalation tube)
(Inhalation tube)
Consult operating
Consult operating
Consult operating
Consult operating
instructions
instructions
instructions
instructions
CAUTION
CAUTION
CAUTION
CAUTION
Hot surface may
Hot surface may
Hot surface may
Hot surface may
exceed 75
exceed 75
exceed 75
exceed 75℃
℃
℃
℃
Drip Proof
Drip Proof
Drip Proof
Drip Proof
Caution
Caution
Caution
Caution
Electrical Shock Hazard.
Electrical Shock Hazard.
Electrical Shock Hazard.
Electrical Shock Hazard.
Refer to qualified service
Refer to qualified service
Refer to qualified service
Refer to qualified service
Personnel.
Personnel.
Personnel.
Personnel.
CE Mark
CE Mark
CE Mark
CE Mark
