COMMISSIONING
18
5
COMMISSIONING
5.1
Safety instructions for commissioning
WARNING!
Risk of injury in case of improper operation!
Improper operation may result in serious injury or property damage.
►
Observe the safety instructions from section “2 Safety instructions.”
►
Are all acceptance reports available? (initial startup)
►
Are there no people in the danger zones?
►
Was the assembly performed completely according to instructions?
►
Have excess materials, tools and auxiliary devices been cleared from the danger
zones?
►
Has the electrical system been powered up by an authorized electrically trained
person (see section “2 Safety instructions”)
WARNING!
Danger to unauthorized persons!
Unauthorized persons who do not meet the requirements described here do not know
the dangers in the respective work area.
►
Keep unauthorized persons away from the work area.
►
If in doubt, speak to people and expel them from the work area.
►
Interrupt the work as long as the unauthorized persons are in the work area.
WARNING!
Hazard in case of insufficient qualification of personnel!
Insufficiently qualified persons are unable to judge the risks when working on the sys-
tem, which puts them and others at risk if severe or fatal injuries.
►
All work must be performed by qualified personnel only
►
Insufficiently qualified personnel must stay out of the work area
WARNING!
Risk of injury from falling parts!
In case of improper use (faulty assembly, misuse, failure to perform maintenance,
etc.), there is a risk of parts falling down.
►
Wear a helmet
►
Perform regular maintenance