SMGM MODULES
42
6.7.2
Mobile module: BCC/SMGM-PN
Mobile interface between the SMGM rail and the mobile components. A VAHLE DCS controller must be con-
nected to this module.
Connections
Description
X1 Logic supply / communication
24VDC±10% / 500mA / system-CAN bus connection
X2 RS485 interface
Connection APOS optic reading head
X3 Ethernet Port2
Ethernet interface 2
X4 Ethernet Port1
Not used
ANT1
SMGM coupler interface 1
ANT2
SMGM coupler interface 2
SMGM Interface ANT1 & ANT2
Description
System connection
QLS - plug connection
Connection cable (HF cable)
see section “7.2 HF wiring”
Terminating resistor
An HF port that is not used must be terminated with
the HF terminating resistor SMGM-XB-QLS-EA.
