COMMISSIONING
74
NOTICE!
This interlocking (approx. 30° downwards) prevents
unintentional shifting of the connector onto the VMT
profile.
5.4.4
Creating VMT shorter lengths
Step 6
Required tools:
⚒
Sawing device SV-VMT
Assembly instructions:
1. If required, you can create shorter lengths on the
construction side using the SV-VMT sawing de-
vice.
2. Deburr the cut edges.
CAUTION!
Danger of injury!
Serious cutting injuries can occur if the cut edge is
not deburred.
►
Ensure that the cut edge is properly deburred.
Summary of Contents for VCL Series
Page 95: ...INDEX 93 U Unloading 88...
Page 96: ...CE Technical Documentation...