MAINTENANCE
78
8.1
Safety information about repairs
DANGER!
Before beginning any work, ensure that the system is free of voltage and remains so
for the duration of the work. Observe the safety instructions from chapter “Safety”!
WARNING!
Risk of injury in case of improperly executed maintenance!
Improper maintenance may cause serious injuries or property damage.
►
Ensure sufficient installation space before beginning any work.
►
Ensure that the working area is clean and well organized!
►
Before beginning any work, follow the procedures according to section. “Risks due
to electrical energy”.
WARNING!
Hazard in case of insufficient qualification of personnel!
Insufficiently qualified persons are unable to judge the risks when working on the sys-
tem, which puts them and others at risk if severe or fatal injuries.
►
All work must be performed by qualified personnel only.
►
Insufficiently qualified personnel must stay out of the work area.
CAUTION!
Tripping hazard due to protruding parts
There is a tripping hazard during the work.
►
Watch out for steps and holes in the floor when walking inside the work area and
the danger zone. There must be no loose objects in the work area.
NOTICE!
The following service and maintenance tasks must be performed to maintain the war-
ranty and avoid damage to the system in general. These must be performed by the
owner.
►
Contact the manufacturer for questions about service and maintenance work.
►
The intervals indicated below depend on the conditions under which the system is
operated. This is why only average intervals are given.
Summary of Contents for VKS10
Page 89: ...MAINTENANCE 87 Connecting caps mast assembly before Connecting caps mast assembly after ...
Page 96: ...PROTECTIVE MEASURES 94 10 PROTECTIVE MEASURES 10 1 EU conformity declaration ...
Page 99: ...CE Technical Documentation DQS certified in accordance DIN EN ISO 9001 2015 OHSAS 18001 2007 ...